{"title":"PowerTrays","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBuilt using high quality 1\/8\" brushed aluminum. Our trays offer the strength one demands when venturing off into the unknown. With the end user in mind we designed our trays to be compatible with the industries most popular accessories.\u003c\/span\u003e","products":[{"product_id":"blank-lowpro-powertray-4runner-fj-cruiser-gx","title":"LowPro Powertray - 4Runner\/ FJ Cruiser\/ GX","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eIntroducing the New LowPro Powertray.\u003c\/strong\u003e For this Powertray the fender-side bend gets reversed. So with this design, the two M8 fender bolts can be easily accessed right above the surface of the tray. \u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhats the difference between the new LowPro Powertray and the original Powertray design?\u003c\/strong\u003e Short answer, surface area and hood clearance.\u003c\/p\u003e\n\u003cp\u003eThe LowPro trays mount about 1.5 inches lower in the engine compartment due to reversing the fender-side bend. This causes some interference with the OE wiring harnesses that come out of the master cylinder. The original Powertray design simply installs overtop those harnesses, so it can be made wider. Also, since the \u003cmeta charset=\"utf-8\"\u003eLowPro mounts lower, it provides increased clearance between the surface of the tray to the underside of the hood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho would the LowPro Powertray work best for?\u003c\/strong\u003e The LowPro Powertray works best for applications where increased hood clearance is needed; Or for people who have a more minimalistic vision and don't plan on having more than a couple accessories to power.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOne more thing to consider... Is how often you'll be wiring things up over the course of the builds life. The LowPro Powertray sits at about the same height as the factory fuse block lid when installed. This flush aesthetic adds a great visual appeal but also makes it kinda difficult run wires; whereas, the original Powertray design mounts higher up and allows more room to get a hand between the surface of the tray and factory fuse block (lid removed). Having extra height and easier access makes it far more convenient to wire up things when you’re adding sweet mods to your rig. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct includes: \u003c\/strong\u003eThe LowPro PowerTray, Support Leg, and Mounting Hardware.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/\/8a-umrMY158\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"\"\u003eCheck out how Wasting Time In The Woods used this tray to install a SmittyBilt Compressor in his GX460.\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fit\u003c\/strong\u003e - PowerTrays install without the need to modify anything on your rig. 100% bolt in installation. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing four points of contact, you can be sure that your valuable electronics are safe and secure. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality Mounting Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Since the mounting hardware on this design is more pronounced, we supply high quality stainless steel mounting hardware that combines both form and function to achieve a product that is as strong as it is beautiful.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy \u003c\/strong\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this Powertray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong data-mce-fragment=\"1\"\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: Some 4Runner's may have a little bracket that holds a small wiring harness bolted to one of the M8 threaded holes located on the inner fender. The top of this bracket will need to be cut off in order to install this Low-pro PowerTay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e","brand":"PowerTrays","offers":[{"title":"Raw Aluminum","offer_id":57045148139679,"sku":"12032","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat","offer_id":57045148172447,"sku":"12033","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20250227_133406-1.jpg?v=1744045534"},{"product_id":"bussmann-rtmr-powertray","title":"Bussmann RTMR PowerTray  \u003e TACOMA \u003e TRD OFF ROAD\/PRO","description":"\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4 style=\"text-align: center;\"\u003eAre you more of a DIY kind of person? The tried and tested Bussmann Series 15300 Rear Terminal Mini Fuse and Relay panel (RTMR) May be for you.\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThe Eaton Series 15300 Rear Terminal Mini Fuse and Relay panel (RTMR) provides efficient power distribution in a rugged compact form for applications in marine, construction, agriculture, heavy trucking, specialty vehicles, etc. This innovative product offers a weather tight enclosure (IP66) for various MINI (2.8mm) blade components when cover, cable seals, and cavity plugs are installed. It is available with various degrees of internal electrical bussing. Additionally, custom labels and multiple hardware configurations are available to solve any application need.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-Current) with the following requirements:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edo not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehave the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eyour Tacoma has a\u003cspan\u003e \u003c\/span\u003emanual transmission\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":59204690706591,"sku":"2012","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/TACO-RTMR.jpg?v=1740169898"},{"product_id":"1-blank-powertray","title":"Blank PowerTray \u003e 4Runner\/ FJ Cruiser\/ GX","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eThe Blank PowerTray lets you customize and design your own electrical setup based on whatever components fit your needs.\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp style=\"padding-left: 30px;\"\u003eNote: Despite being called the \"Blank\" PowerTray, it still has the elongated bolt slots on the bend down tabs so it can be installed without any modification needed to either the PowerTray or your vehicle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDon't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 4th and 5th gen 4Runner's 02-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":47655866335391,"sku":"12033","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20250107_113956-113.jpg?v=1740170030"},{"product_id":"1-arb-single-compressor-powertray","title":"ARB \/ Switch-Pro PowerTray - 4RUNNER\/ FJ CRUISER\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eCOMBINING THE POWER OF THE SWITCH-PROS MODULE WITH THE ORGANIZATION OF BLUE SEA SYSTEMS GIVES YOU EVERYTHING YOU NEED TO ORGANIZE AND MAINTAIN YOUR ELECTRICAL SYSTEM LIKE A PROFESSIONAL.\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eTake all the guess work out of wiring in a new accessory. The Switch-Pros PowerTray employs a dedicated grounding busbar and an isolated-circuit terminal block to make wiring up new products a breeze. No more fiddling around with excess wires or scrambling to find a place to ground your accessories’ negative wire. We've been there and done that and have learned from our struggles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNow with the Switch-Pros PowerTray system installed, wiring in a new accessory (like a light bar or fridge outlet) is as easy as taking the positive and negative wires from your new accessory and running them up through the center wire slot and crimping on two small ring terminals. Then simply attach the positive wire to one of the isolated circuits on the Blue Seas Terminal Block and the negative wire to the common ground of the Blue Seas Busbar. That's it, you're done!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ARB\/Switch-Pros PowerTray also features a slim Blue Sea 8 circuit fuse block which gives you the added ability to wire in accessories that would be inconvenient to power though a Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on. Having an addition fuse block is also great for accessories that use the vehicles own internal system to activate. For example, aftermarket HID headlights, aftermarket Horns, front\/rear mount cameras, etc. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the ARB\/Switch-Pros PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Switch-Pros, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor all Blue Sea accessories, Cables, Hardware, and terminals needed for installation\u003c\/strong\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca title=\"ACCESSORY BUNDLE FOR ARB\/SWITCH-PRO POWERTRAY \u0026gt; 4RUNNER\/ FJ CRUISER\/ GX\" href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-arb-switch-pro-powertray-4runner-fj-cruiser-gx\"\u003e\u003cstrong\u003e \u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003eClick Here\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFor the ARB Air Coupler Relocation Kit \u003ca href=\"https:\/\/www.powertrays.com\/collections\/power-accessories\/products\/arb-air-coupler-relocation-kit\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 1.4em;\"\u003eClick Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Don't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":51347854000287,"sku":"12032","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20250409_114203-1.jpg?v=1744220993"},{"product_id":"1-arb-solar-powertray","title":"ARB \/ Solar PowerTray \u003e 4RUNNER\/ FJ CRUISER\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eARB Single, Blue Sea Fuse Box and Zamp solar charge controller for a truly complete power system.\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eZamp 5 Stage 10 Amp PWM Solar Charge Controller uses a large digital display showing volts, amps and amp over a period of time while LED lights show charging status and battery condition. Our digital deluxe 10 Amp Solar Charge Controller is designed to do it’s job with out the need for maintenance but it also is feature rich to monitor and indicate system functions. It supports, and is programmable for 4 typical types of deep cycle batteries (WET, GET, AGM and Calcium) as well as lithium batteries (LTO and LifeP04).For now installation of the\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eT\u003c\/span\u003e\u003cspan\u003ehe\u003c\/span\u003e\u003cspan\u003e ARB\/Solar \u003c\/span\u003e\u003cspan\u003ePowerTray\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003efeatures a \u003c\/span\u003e\u003cspan\u003eBlue Sea 6 circuit fuse block\u003c\/span\u003e\u003cspan\u003e which gives you the added ability to wire in your aftermarket accessories.\u003c\/span\u003e\u003c\/p\u003e\n\u003cb\u003e\u003c\/b\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the ARB\/Solar PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Switch-Pros, ARB, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, etc.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eRecommended Accessories:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/arb-air-coupler-relocation-kit\" data-mce-href=\"https:\/\/www.powertrays.com\/products\/arb-air-coupler-relocation-kit\"\u003eARB Air Coupler Relocation Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eARB single compressor\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eARB air up kit\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eZamp solar charge controller\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Don't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 02-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\" data-mce-style=\"padding-left: 30px;\"\u003e\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42336798310559,"sku":"12032","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_2326.jpg?v=1598513674"},{"product_id":"blank-powertray-05-current-tacoma-sr-sr5-trd-sport-limited","title":"Blank PowerTray \u003e Tacoma \u003e SR, SR5, TRD Sport, Limited","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003eThe Blank PowerTray lets you customize and design your own electrical setup based on whatever components fit your needs. \u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left; padding-left: 30px;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003c\/strong\u003e Despite being called the \"Blank\" PowerTray, it still has the elongated bolt slots on the bend down tabs so it can be installed into the factory threaded holes without any modification needed to either the PowerTray or your vehicle.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber laser manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVacuum Booster Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003ethis includes SR, SR5, TRD Sport and Limited models. These models feature a traditional vacuum booster as opposed to being electronically assisted like in the TRD Off Road models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the vacuum booster behind the master cylinder. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e  \u003cspan data-mce-fragment=\"1\"\u003eto see a pic of both.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eSo\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eyour Tacoma has a\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e \u003cspan data-mce-fragment=\"1\"\u003emanual transmission\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ehas \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Raw Aluminum","offer_id":56675897344159,"sku":"1032","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat","offer_id":56675897376927,"sku":"1033","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_4432.jpg?v=1598423544"},{"product_id":"blank-powertray-05-current-tacoma-trd-off-road-pro","title":"Blank PowerTray \u003e Tacoma \u003e TRD Off Road and TRD Pro","description":"\u003cdiv\u003e\n\u003cp style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eThe Blank PowerTray lets you customize and design your own electrical setup based on whatever components fit your needs. \u003c\/p\u003e\n\u003cp style=\"text-align: left; padding-left: 30px;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left; padding-left: 30px;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Despite being called the \"Blank\" PowerTray, it still has the elongated bolt slots on the bend down tabs so it can be installed into the factory threaded holes without any modification needed to either the PowerTray or your vehicle.\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePerfect fit\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23\u003c\/strong\u003e\u003cstrong\u003e) with the following requirements:\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and \u003cspan style=\"text-decoration: underline;\"\u003edo not\u003c\/span\u003e have the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir. \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e your Tacoma has a manual transmission \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e has \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir.  \u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-fragment=\"1\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":47656442626207,"sku":"1033","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20250107_104743-11.jpg?v=1740169964"},{"product_id":"bantam-powertray-05-current-tacoma-sr-sr5-trd-sport-limited","title":"BantamX\/SourceLT PowerTray \u003e Tacoma \u003e SR, SR5, TRD Sport, Limited","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cb\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR SPOD BANTAMX:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1. Original BantamX:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eThe brand new sPOD BantamX and SourceLT will save you hours of wiring \u0026amp; installation time! Mount it on our PowerTray for a truly professional looking install.\u003c\/p\u003e\nIt is a small, 8-circuit or 6-circuit control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Original BantamX PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the BantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e2. Essentials BantamX:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis option is the same as the Original BantamX PowerTrays seen above, but is a simpler, more compact solution to mount your BantamX system by removing all excess space\/material.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your BantamX.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Essentials BantamX PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the BantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEM® Fasteners \u003c\/strong\u003e- Pressed into the PowerTray, genuine PEM fasteners Allow you to secure the BantamX directly\u003cspan\u003e \u003c\/span\u003eto the PowerTray for a clean low-profile installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e \u003cspan\u003e \u003c\/span\u003eThe fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese Industrial Standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVacuum Booster Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003ethis includes SR, SR5, TRD Sport and Limited models. These models feature a traditional vacuum booster as opposed to being electronically assisted like in the TRD Off Road models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\"\u003eCLICK HERE\u003c\/a\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eto see a pic of both.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eSo\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eyour Tacoma has a\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003emanual transmission\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ehas \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\"\u003ethis reservoir\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-fragment=\"1\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PowerTrays","offers":[{"title":"Original BantamX","offer_id":42947280666783,"sku":"1032","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Essentials BantamX","offer_id":42947280699551,"sku":"1033","price":95.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_7779.jpg?v=1620669230"},{"product_id":"blank-powertray-chevy-colorado-12-current","title":"Blank PowerTray \u003e Chevy Colorado 14-22","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003eIntroducing the Chevy Colorado PowerTray.\u003c\/h4\u003e\n\u003cp\u003eInstalls by using two factory mounting locations and requires no drilling or permanent modification to your vehicle. \u003cstrong\u003eNote:\u003c\/strong\u003e You do not need to remove the drivers side headlight to install this PowerTray. Simply pry up the plastic tab on the headlight housing slightly and you will have enough clearance to fit a wrench under to access the factory bolt hidden under it. \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003eThis is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003ejagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003escratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing two points of contact on two of the sides, you can be sure that your valuable electronics are safe and supported.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eAll PowerTrays are designed, manufactured , and shipped from Colorado.\u003c\/strong\u003e\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439218675871,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_4481.jpg?v=1598514020"},{"product_id":"vertical-mount-switch-pros-powertray-05-current-tacoma-trd-off-road-pro","title":"Switch-Pros PowerTray \u003e Tacoma TRD Off Road\/Pro","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\n\u003cb\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR SWITCH-PROS:\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1. Original Switch-Pros PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTake all the guess work out of wiring up a new accessory. The Orignal Switch-Pros PowerTray employs a dedicated 8 circuit barrier terminal block and low profile grounding busbar, which creates the ultimate wire management solution for your Switch-Pros. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNow with the Original Switch-Pros PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 8 circuits on the barrier terminal block and the negative to your common ground busbar. That's it, you're done! No need to bust out a soldering iron or buy fancy connectors that require expensive specialty crimpers.\u003c\/p\u003e\n\u003cp\u003eThe Original Switch-Pros PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out this install we did with Runnin4Tacos!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe height=\"315\" width=\"560\" src=\"https:\/\/www.youtube.com\/embed\/Jd1yDRXkszc\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Original Switch-Pros PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e include the Switch-Pros, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-switch-pro-powertray-toyota\" title=\"Accessory Bundle\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-switch-pro-powertray-toyota\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e2. Essentials Switch-Pros PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis option is the same as the Original Switch-Pros PowerTray seen above, minus the fuse block. Its a simple, compact solution to mount your Switch-Pros system and the Blue Sea terminal block and busbar so you can keep your wiring clean and organized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your Switch-Pros.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis product is for the Essentials Switch-Pros PowerTray and mounting hardware.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIt does not include the Switch-Pros, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca href=\"https:\/\/www.powertrays.com\/products\/switch-pros-accessory-bundle-tacoma-trd-off-road-4runner-fj-cruiser-gx\" title=\"Accessory Bundle\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Powder Coat Finish \u003c\/strong\u003e- We use a high quality fine textured black powder coat to match your other accessories.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e - The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and \u003cspan style=\"text-decoration: underline;\"\u003edo not\u003c\/span\u003e have the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e your Tacoma has a \u003cmeta charset=\"utf-8\"\u003emanual transmission \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e has \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir.  \u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Hood Struts:\u003c\/strong\u003e If you have or plan to install aftermarket hood struts, The PowerTray will need spaced out approximately 1\/2 inch so the hood strut clears the Switch-Pros power module. \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e for the spacer kit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original Switch-Pros PowerTray","offer_id":44597857747103,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Switch-Pros PowerTray","offer_id":42946892693663,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20220622_150855A.jpg?v=1709669559"},{"product_id":"vertical-mount-switch-pros-powertray-4runner-fj-cruiser-gx-470","title":"Switch-Pros PowerTray \u003e 4Runner\/ FJ Cruiser\/ GX","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4 data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cb\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR SWITCH-PROS:\u003c\/b\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1. Original Switch-Pros PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTake all the guess work out of wiring up a new accessory. The Original Switch-Pros PowerTray employs a dedicated 8 circuit barrier terminal block and low profile grounding busbar, which creates the ultimate wire management solution for your Switch-Pros. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003c\/p\u003e\n\u003cp\u003eNow with the Original Switch-Pros PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 8 circuits on the barrier terminal block and the negative to your common ground busbar. That's it, you're done! No need to bust out a soldering iron or buy fancy connectors that require expensive specialty crimpers.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Original Switch-Pros PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp\u003eThis addition fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out this install we did with Runnin4Tacos!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Jd1yDRXkszc\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Original Switch-Pros PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Switch-Pros, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-switch-pro-powertray-toyota\" title=\"Accessory Bundle\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e2. Essentials Switch-Pros PowerTray:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis option is the same as the Original Switch-Pros PowerTray seen above, minus the fuse block. Its a simple, compact solution to mount your Switch-Pros system and the Blue Sea terminal block and busbar so you can keep your wiring clean and organized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your Switch-Pros.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis product is for the Essentials Switch-Pros PowerTray and mounting hardware.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIt does not include the Switch-Pros, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003cstrong data-mce-fragment=\"1\"\u003e\u003ca title=\"Accessory Bundle\" href=\"https:\/\/www.powertrays.com\/products\/switch-pros-accessory-bundle-tacoma-trd-off-road-4runner-fj-cruiser-gx\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Powder Coat Finish \u003c\/strong\u003e- We use a high quality fine textured black powder coat to match your other accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDon't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with \u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir.  \u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\u003cstrong\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1\/2 inch in order to clear the factory hood struts. \u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e to purchase the spacer kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original Switch-Pros PowerTray","offer_id":42306118385823,"sku":"1032","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Switch-Pros PowerTray","offer_id":42946913566879,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/20220622_153157A.jpg?v=1655934459"},{"product_id":"vertical-mount-switch-pros-powertray-05-current-tacoma-sr-sr5-trd-sport-limited","title":"Switch-Pros PowerTray \u003e Tacoma \u003e SR, SR5, TRD Sport, Limited","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cb data-mce-fragment=\"1\"\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR SWITCH-PROS:\u003c\/b\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1. Original Switch-Pros PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eTake all the guess work out of wiring up a new accessory. The Original Switch-Pros PowerTray employs a dedicated 8 circuit barrier terminal block and low profile grounding busbar, which creates the ultimate wire management solution for your Switch-Pros. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNow with the Original Switch-Pros PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 8 circuits on the barrier terminal block and the negative to your common ground busbar. That's it, you're done! No need to bust out a soldering iron or buy fancy connectors that require expensive specialty crimpers.\u003c\/p\u003e\n\u003cp\u003eThe Original Switch-Pros PowerTray also features the Blue Sea 4 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out this install with Running4Tacos! This was installed in an Offroad model and not the sport Tacoma, but still lots of great information in this video.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Jd1yDRXkszc\" width=\"560\" height=\"315\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Original Switch-Pros PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Switch-Pros, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca title=\"Accessory Bundle\" href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-switch-pro-powertray-tacoma-trd-sport-sr5-limited\" data-mce-href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-switch-pro-powertray-tacoma-trd-sport-sr5-limited\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e2. Essentials Switch-Pros PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis option is the same as the original Switch-Pros PowerTray seen above, minus the fuse block. Its a simple, compact solution to mount your Switch-Pros system and the Blue Sea terminal block and busbar so you can keep your wiring clean and organized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your Switch-Pros.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis product is for the Essentials Switch-Pros PowerTray and mounting hardware.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIt does not include the Switch-Pros, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca href=\"https:\/\/www.powertrays.com\/products\/switch-pros-accessory-bundle-tacoma-trd-off-road-4runner-fj-cruiser-gx\" title=\"Accessory Bundle\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEM® Fasteners with Stainless Steel Screws\u003c\/strong\u003e - Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVacuum Booster Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003ethis includes SR, SR5, TRD Sport and Limited models. These models feature a traditional vacuum booster as opposed to being electronically assisted like in the TRD Off Road models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the vacuum booster behind the master cylinder. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eto see a pic of both.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eSo\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eyour Tacoma has a\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003emanual transmission\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ehas \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-fragment=\"1\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Hood Struts:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf you have or plan to install aftermarket hood struts, The PowerTray will need spaced out approximately 1\/2 inch so the hood strut clears the Switch-Pros power module. \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e for the spacer kit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original Switch-Pros PowerTray \/ Black Powder Coat","offer_id":45002866753695,"sku":"","price":135.0,"currency_code":"USD","in_stock":false},{"title":"Essentials Switch-Pros PowerTray \/ Black Powder Coat","offer_id":45002866786463,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20240305_135813.jpg?v=1709672546"},{"product_id":"bantamx-powertray-4runner-fj-cruiser-gx-470","title":"BantamX\/SourceLT PowerTray \u003e 4Runner\/ FJ Cruiser\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cb\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR SPOD BANTAMX:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1. BantamX+Fuse:\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eThe brand new sPOD BantamX and SourceLT will save you hours of wiring \u0026amp; installation time! Mount it on our PowerTray for a truly professional looking install.\u003c\/p\u003e\nIt is a small, 8-circuit or 6-circuit control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eThe BantamX + Fuse block PowerTray also features a mounting location for a Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003cbr\u003e\u003cbr\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cstrong\u003eThis product is for the BantamX+Fuse PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the BantamX\/SourceLT, Blue Sea Accessories, Power\/Ground Cables, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the BantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e2.Essentials BantamX:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis option is the same as the BantamX PowerTrays seen above, but is a simpler, more compact solution to mount your BantamX system by removing all excess space\/material.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your BantamX.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Essentials BantamX PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the BantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Powder Coat Finish \u003c\/strong\u003e- We use a high quality fine textured black powder coat to match your other accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEM® Fasteners \u003c\/strong\u003e- Pressed into the PowerTray, genuine PEM fasteners Allow you to secure the BantamX directly to the PowerTray for a clean low-profile installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Laser manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 4th and 5th gen 4Runner's 02-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca rel=\"noopener\" href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\" data-mce-style=\"padding-left: 30px;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat \/ BantamX+Fuse PowerTray","offer_id":42947272704159,"sku":"","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat \/ Essentials BantamX PowerTray","offer_id":42947272736927,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20240404_132309.jpg?v=1712258793"},{"product_id":"bantamx-powertray-05-current-tacoma-trd-off-road-pro","title":"BantamX\/SourceLT PowerTray \u003e Tacoma \u003e TRD Off Road\/Pro","description":"\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\n\u003cspan style=\"color: #ff0000;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cp style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cb data-mce-fragment=\"1\"\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR SPOD BANTAMX:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1. BantamX+Fuse:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eThe brand new sPOD BantamX and SourceLT will save you hours of wiring \u0026amp; installation time! Mount it on our PowerTray for a truly professional looking install.\u003c\/p\u003e\nIt is a small, 8-circuit or 6-circuit control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12\/24VDC accessories.\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eThe BantamX + Fuse block PowerTray also features a mounting location for a Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the BantamX+Fuse PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the BantamX\/SourceLT, Blue Sea Accessories, Power\/Ground Cables, etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the BantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.Essentials BantamX:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis option is the same as the BantamX PowerTrays seen above, but is a simpler, more compact solution to mount your BantamX system by removing all excess space\/material.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your BantamX.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the Essentials BantamX PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the BantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eBlack Powder Coat Finish \u003c\/strong\u003e- We use a high quality fine textured black powder coat to match your other accessories.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners \u003c\/strong\u003e- Pressed into the PowerTray, genuine PEM fasteners Allow you to secure the BantamX directly to the PowerTray for a clean low-profile installation.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFiber Laser manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePerfect fit\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edo not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehave the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eyour Tacoma has a\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003emanual transmission\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat \/ BantamX+Fuse PowerTray","offer_id":42947277684895,"sku":"","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat \/ Essentials BantamX PowerTray","offer_id":42947277717663,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20240404_115108_6682772f-e7e5-4ec9-a148-ff2a246b846c.jpg?v=1712257596"},{"product_id":"bussmann-rtmr-powertray-4runner-fj-cruiser-gx","title":"Bussmann RTMR PowerTray \u003e 4RUNNER\/ FJ CRUISER\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003eAre you more of a DIY kind of person? The tried and tested Bussmann Series 15300 Rear Terminal Mini Fuse and Relay panel (RTMR) May be for you.\u003cbr\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThe Eaton Series 15300 Rear Terminal Mini Fuse and Relay panel (RTMR) provides efficient power distribution in a rugged compact form for applications in marine, construction, agriculture, heavy trucking, specialty vehicles, etc. This innovative product offers a weather tight enclosure (IP66) for various MINI (2.8mm) blade components when cover, cable seals, and cavity plugs are installed. It is available with various degrees of internal electrical bussing. Additionally, custom labels and multiple hardware configurations are available to solve any application need.\u003c\/span\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Bussmann RTMR, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDon't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\u003cstrong\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1\/2 inch in order to clear the factory hood struts. \u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\" data-mce-href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto purchase the spacer kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62803151618207,"sku":"2012","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/6C24DCF4-3E7D-4CBE-873D-28624A744A97_1_201_a_bf5b3186-de85-4ef8-ab10-23572541f090.jpg?v=1606281328"},{"product_id":"switch-pros-powertray-jeep-jl-jt","title":"Switch-Pros PowerTray \u003e Jeep JL\/JT 2018-Current \u003e 3.6L V6","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCOMBINING THE POWER OF THE SWITCH-PROS MODULE WITH THE ORGANIZATION OF BLUE SEA SYSTEMS GIVES YOU EVERYTHING YOU NEED TO ORGANIZE AND MAINTAIN YOUR ELECTRICAL SYSTEM LIKE A PROFESSIONAL.\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTake all the guess work out of wiring up a new accessory. The Switch-Pros PowerTray employs a dedicated 8 circuit barrier terminal block and low profile grounding busbar, which creates the ultimate wire management solution for your Switch-Pros. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNow with the Switch-Pros PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 8 circuits on the barrier terminal block and the negative to your common ground busbar. That's it, you're done! No need to bust out a soldering iron or buy fancy connectors that require expensive specialty crimpers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-switch-pro-powertray-jeep-jl-jt\" title=\"JL\/JT Accessory Bundle\"\u003eCLICK HERE\u003c\/a\u003e for all the components needed for a full install.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePEM® Fasteners with Stainless Steel Screws - \u003c\/strong\u003ePressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003eThis is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003ejagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003escratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact you can be sure that your valuable electronics are safe and supported.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eAll PowerTrays are designed, manufactured , and shipped from Colorado.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":46690623488159,"sku":"","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_7562.jpg?v=1613766233"},{"product_id":"dual-bantamx-source-lt-powertray-tacoma-trd-off-road-pro","title":"Dual BantamX\/Source LT PowerTray \u003e TACOMA \u003e TRD OFF ROAD\/PRO","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch4 style=\"text-align: left;\"\u003eWhats better than having the all new sPOD BantamX\/Source LT powering all your off road accessories? How about having two sPOD Bantam's powering all your off road accessories!\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003esPOD has done it again with their new solid state Power Distribution System. The Bantam brings a whole new level of control to your vehicles accessories. Also, with less than half the footprint of sPOD's renowned Source SE System, the small size of the sPOD Bantam makes it a perfect choice for any adventure vehicle.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the BantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEM® Fasteners \u003c\/strong\u003e- Pressed into the PowerTray, genuine PEM fasteners Allow you to secure the BantamX\/SourceLT directly to the PowerTray for a clean low-profile installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edo not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehave the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eyour Tacoma has a\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003emanual transmission\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439218413727,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_7159.jpg?v=1612895267"},{"product_id":"dual-bantamx-source-lt-powertray-4runner-fj-cruiser-gx","title":"Dual BantamX\/Source LT PowerTray \u003e 4RUNNER\/ FJ CRUISER\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eWhats better than having the all new sPOD BantamX\/Source LT powering all your off road accessories? How about having two Bantam's powering all your off road accessories!\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003esPOD has done it again with their new solid state Power Distribution System. The Bantam brings a whole new level of control to your vehicles accessories. Also, with less than half the footprint of sPOD's renowned Source SE System, the small size of the sPOD Bantam makes it a perfect choice for any adventure vehicle.\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eDoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the\u003cspan\u003e \u003c\/span\u003eBantamX\/SourceLT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEM® Fasteners \u003c\/strong\u003e- Pressed into the PowerTray, genuine PEM fasteners Allow you to secure the BantamX directly\u003cspan\u003e \u003c\/span\u003eto the PowerTray for a clean low-profile installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eDon't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese Industrial Standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSale@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 4th and 5th gen 4Runner's 02-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003c\/div\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003e\u003c\/h2\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439218053279,"sku":null,"price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_7158.jpg?v=1612895393"},{"product_id":"switch-pros-powertray-standoff","title":"Switch-Pros PowerTray \u003e Standoff","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003eThe original Switch-Pros PowerTray just got even better. Introducing a new, more universal mounting option that can be installed onto any flat surface.\u003c\/h4\u003e\n\u003cp\u003eThe Standoff Switch-Pros PowerTray was designed as a universal style mount for any vehicle or camper build you want.\u003c\/p\u003e\n\u003cp\u003eIt also works great for Toyota’s that have something obstructing the usual PowerTray location. For example, many manual transmission Tacoma's and FJ's have a clutch fluid reservoir mounted right where the PowerTray traditionally installs. For these models this tray works really well if you mount it to the top of the OE fuse block cover. The beautiful thing about mounting it on top of the factory fuse block is the OE fuses and relays can still be accessed if needed without any tools. We're super excited about this product and its versatility. We can't wait to see all the cool applications our customers use this for!\u003c\/p\u003e\n\u003cp\u003eProduct includes everything seen in photo one. The second two photos are digital renderings only used to show the accessories that you will mount to it.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e The exterior dimensions are 11.00\" x 5.08\".\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Powder Coat Finish \u003c\/strong\u003e- We use a high quality fine textured black powder coat to match your other accessories.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e Designed to mount to any flat surface such as firewalls, fuse block lids, and battery boxes.\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing four points of contact, you can be sure that your valuable electronics are safe and supported. Included are \u003cspan data-mce-fragment=\"1\"\u003e4 easy to install counter sunk screws with aluminum spacers and nuts.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality Stainless Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Stainless steel flush mount hardware allows the mounting screws to sit flush on the tray which is hidden by the accessories.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003eAluminum Spacers - \u003c\/strong\u003eAlso included are half inch aluminum spacers which has 3M adhesive applied to one side. Allowing the spacer to stick to the tray for the those harder to reach install locations. \u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42336852246687,"sku":"","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20240402_114304.jpg?v=1712080475"},{"product_id":"spod-bantamx-powertray-chevy-colorado-12-current","title":"sPOD BantamX PowerTray \u003e Chevy Colorado 12-22","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cstrong\u003e \u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003eHarness the power and capabilities of the all new BantamX by sPOD to power your aftermarket lights and accessories.\u003c\/h4\u003e\n\u003cp\u003eMounting hardware for circuit breaker and sPOD included.\u003c\/p\u003e\n\u003cp\u003esPOD and Circuit Breaker sold separately.\u003c\/p\u003e\n\u003cp\u003eTo purchase PowerTrays compact waterproof circuit breakers \u003ca href=\"https:\/\/www.powertrays.com\/collections\/power-accessories\/products\/high-amp-waterproof-circuit-breaker\"\u003eclick here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWorks with sPOD's BantamX (8-switch) and SourceLT (6-switch).\u003c\/p\u003e\n\u003cp\u003eInstalls right behind the drivers side headlight by using two factory mounting locations and requires no drilling or permanent modification to your vehicle.  \u003cstrong\u003eNote:\u003c\/strong\u003e you do not need to remove the drivers side headlight to install this PowerTray. Simply pry up the plastic tab on the headlight housing slightly and you will have enough clearance to fit a wrench under to access the factory bolt hidden under it. \u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePEM® Fasteners - \u003c\/strong\u003ePressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003eThis is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003ejagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003escratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing two points of contact on two of the sides, you can be sure that your valuable electronics are safe and supported.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eAll PowerTrays are designed, manufactured , and shipped from Colorado.\u003c\/strong\u003e\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439218446495,"sku":null,"price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/IMG_8003.jpg?v=1622226074"},{"product_id":"powerswitch-powertray-4runner-fj-cruiser-gx","title":"Powerswitch PowerTray \u003e 4Runner\/ FJ Cruiser\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cb\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR POWERSWITCH:\u003c\/b\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1. Original PowerSwitch PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTake all the guess work out of wiring up a new accessory. The Original Powerswitch PowerTray creates the ultimate wire management solution for your PowerSwitch, while also providing a Blue Sea Systems 6 circuit fuse block for constant power and a ground bus bar. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the Powerswitch PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 6 circuits on the Powerswitch unit and the negative to your common ground busbar. That's it, you're done!\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Original Powerswitch PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Powerswitch. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the Original Powerswitch PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Garmin Powerswitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca title=\"Accessory Bundle\" href=\"https:\/\/www.powertrays.com\/products\/powerswitch-accessory-bundle-tacoma-trd-off-road-4runner-fj-cruiser-gx\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e2. Essentials PowerSwitch PowerTray:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis option is the same as the Original PowerSwitch PowerTray seen above, minus the fuse block. Its a simple, compact solution to mount your PowerSitch system and busbar so you can keep your wiring clean and organized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your PowerSwitch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis product is for the Essentials PowerSwitch PowerTray and mounting hardware.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIt does not include the PowerSwitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca href=\"https:\/\/www.powertrays.com\/products\/powerswitch-accessory-bundle-tacoma-trd-off-road-tacoma-trd-sport-4runner-fj-cruiser-gx\" title=\"Accessory Bundle\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDon't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with \u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir.  \u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\u003cstrong\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1\/2 inch in order to clear the factory hood struts. \u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e to purchase the spacer kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original PowerSwitch PowerTray \/ Black Powder Coat","offer_id":46656041123999,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Essentials PowerSwitch PowerTray \/ Black Powder Coat","offer_id":42946946760863,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20240905_134707.jpg?v=1725565984"},{"product_id":"powerswitch-powertray-tacoma-trd-off-road-pro","title":"Powerswitch PowerTray \u003e Tacoma TRD Off Road\/Pro","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cb\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR POWERSWITCH:\u003c\/b\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003cstrong\u003e1. Original PowerSwitch PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTake all the guess work out of wiring up a new accessory. The Original Powerswitch PowerTray creates the ultimate wire management solution for your PowerSwitch, while also providing a Blue Sea Systems 6 circuit fuse block for constant power and a ground bus bar. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the Original Powerswitch PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 6 circuits on the Powerswitch unit and the negative to your common ground busbar. That's it, you're done!\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Original Powerswitch PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Powerswitch. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Original Powerswitch PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e include the Garmin Powerswitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca title=\"Accessory Bundle\" href=\"https:\/\/www.powertrays.com\/products\/powerswitch-accessory-bundle-tacoma-trd-off-road-4runner-fj-cruiser-gx\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e2. Essentials PowerSwitch PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis option is the same as the Original PowerSwitch PowerTray seen above, minus the fuse block. Its a simple, compact solution to mount your PowerSwitch and busbar so you can keep your wiring clean and organized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your PowerSwitch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis product is for the Essentials PowerSwitch PowerTray and mounting hardware.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIt does not include the PowerSwitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca href=\"https:\/\/www.powertrays.com\/products\/powerswitch-accessory-bundle-tacoma-trd-off-road-tacoma-trd-sport-4runner-fj-cruiser-gx\" title=\"Accessory Bundle\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e - The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and \u003cspan style=\"text-decoration: underline;\"\u003edo not\u003c\/span\u003e have the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e your Tacoma has a \u003cmeta charset=\"utf-8\"\u003emanual transmission \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e has \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir.  \u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Hood Struts:\u003c\/strong\u003e If you have or plan to install aftermarket hood struts, The PowerTray will need spaced out approximately 1\/2 inch so the hood strut clears the Switch-Pros power module. \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e for the spacer kit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original PowerSwitch PowerTray \/ Black Powder Coat","offer_id":46656033882271,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Essentials PowerSwitch PowerTray \/ Black Powder Coat","offer_id":42946965602463,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20240905_132758-1.jpg?v=1725565183"},{"product_id":"bussmann-rfrm-powertray-tacoma-trd-off-road-pro","title":"Bussmann RFRM PowerTray  \u003e TACOMA \u003e TRD OFF ROAD\/PRO","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eThe \"Big Daddy\" in configurable DIY power distribution modules. The Bussmann Series 15400 Rear-fed fuse and relay module (RFRM) is more than guaranteed to fulfill all your power management needs.\u003c\/h2\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eEaton now offers a main power distribution module capable of operating in harsh environment applications. Based on the industry standard 2.8mm (mini) footprint, the RFRM can accept plug-in fuses, relays, circuit breakers, resistors and diodes to meet numerous power management requirements. The RFRM is available with multiple internal bussing options, accommodating various OEM wiring requirements.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Bussmann RTMR, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edo not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehave the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eyour Tacoma has a\u003cspan\u003e \u003c\/span\u003emanual transmission\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":41795083468959,"sku":"","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/20220126_154506.jpg?v=1643239860"},{"product_id":"bussmann-rfrm-powertray-4runner-fj-cruiser-gx","title":"Bussmann RFRM PowerTray \u003e 4RUNNER\/ FJ CRUISER\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eThe \"Big Daddy\" in configurable DIY power distribution modules. The Bussmann Series 15400 Rear-fed fuse and relay module (RFRM) is more than guaranteed to fulfill all your power management needs.\u003c\/h2\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eEaton now offers a main power distribution module capable of operating in harsh environment applications. Based on the industry standard 2.8mm (mini) footprint, the RFRM can accept plug-in fuses, relays, circuit breakers, resistors and diodes to meet numerous power management requirements. The RFRM is available with multiple internal bussing options, accommodating various OEM wiring requirements.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Bussmann RTMR, \u003cmeta charset=\"utf-8\"\u003eBlue Sea accessories, Power\/Ground Cables, terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDon't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\u003cstrong\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1\/2 inch in order to clear the factory hood struts. \u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\" data-mce-href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto purchase the spacer kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":41795089334431,"sku":"","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/20220126_155347.jpg?v=1643240126"},{"product_id":"garmin-powertray-standoff","title":"Powerswitch Powertray \u003e Standoff","description":"\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003eThe original Powerswitch PowerTray just got even better. Introducing a new, more universal mounting option that can be installed onto any flat surface.\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Standoff Garmin Powerswitch PowerTray was designed as a universal style mount for any vehicle or camper build you want.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt also works great for Toyota’s that have something obstructing the usual PowerTray location. For example, many manual transmission Tacoma's and FJ's have a clutch fluid reservoir mounted right where the PowerTray traditionally installs. For these models this tray works really well if you mount it to the top of the OE fuse block cover. The beautiful thing about mounting it on top of the factory fuse block is the OE fuses and relays can still be accessed if needed without any tools. We're super excited about this product and its versatility. We can't wait to see all the cool applications our customers use this for!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct includes everything seen in the first digital rendering. The second two digital renderings are only used to show the accessories that you will mount to it.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e The exterior dimensions are 11.29\" x 6.09\".\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eBlack Powder Coat Finish \u003c\/strong\u003e- We use a high quality fine textured black powder coat to match your other accessories.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUniversal fit\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e Designed to mount to any flat surface such as firewalls, fuse block lids, and battery boxes.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Utilizing four points of contact, you can be sure that your valuable electronics are safe and supported. Included are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e4 easy to install counter sunk screws with aluminum spacers and nuts.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHigh Quality Stainless Steel Hardware\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Stainless steel flush mount hardware allows the mounting screws to sit flush on the tray which is hidden by the accessories. \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePremium\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAluminum Spacers -\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eAlso included are half inch aluminum spacers which has 3M adhesive applied to one side. Allowing the spacer to stick to the tray for the those harder to reach install locations. \u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42810173620383,"sku":"","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20240402_132012.jpg?v=1712085984"},{"product_id":"bantamx-powertray-standoff","title":"BantamX Powertray \u003e Standoff","description":"\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003eThe original BantamX PowerTray just got even better. Introducing a new, more universal mounting option that can be installed onto any flat surface.\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Standoff BatnamX PowerTray was designed as a universal style mount for any vehicle or camper build you want.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt also works great for Toyota’s that have something obstructing the usual PowerTray location. For example, many manual transmission Tacoma's and FJ's have a clutch fluid reservoir mounted right where the PowerTray traditionally installs. For these models this tray works really well if you mount it to the top of the OE fuse block cover. The beautiful thing about mounting it on top of the factory fuse block is the OE fuses and relays can still be accessed if needed without any tools. We're super excited about this product and its versatility. We can't wait to see all the cool applications our customers use this for!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct includes everything seen in photo one. The second two photos are digital renderings only used to show the accessories that you will mount to it.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e The exterior dimensions are 10.24\" x 5.86\".\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUniversal fit\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e Designed to mount to any flat surface such as firewalls, fuse block lids, and battery boxes.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Utilizing four points of contact, you can be sure that your valuable electronics are safe and supported. Included are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e4 easy to install counter sunk screws with aluminum spacers and nuts.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHigh Quality Stainless Steel Hardware\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Stainless steel flush mount hardware allows the mounting screws to sit flush on the tray which is hidden by the accessories. \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePremium\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAluminum Spacers -\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eAlso included are half inch aluminum spacers which has 3M adhesive applied to one side. Allowing the spacer to stick to the tray for the those harder to reach install locations. \u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42810269466783,"sku":"","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/BlankBantamXStandoff.png?v=1669395211"},{"product_id":"sourcese-powertray-standoff","title":"SourceSE PowerTray \u003e Standoff","description":"\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003eThe original SourceSE PowerTray just got even better. Introducing a new, more universal mounting option that can be installed onto any flat surface.\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Standoff SourceSE PowerTray was designed as a universal style mount for any vehicle or camper build you want.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt also works great for Toyota’s that have something obstructing the usual PowerTray location. For example, many manual transmission Tacoma's and FJ's have a clutch fluid reservoir mounted right where the PowerTray traditionally installs. For these models this tray works really well if you mount it to the top of the OE fuse block cover. The beautiful thing about mounting it on top of the factory fuse block is the OE fuses and relays can still be accessed if needed without any tools. We're super excited about this product and its versatility. We can't wait to see all the cool applications our customers use this for!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eProduct includes everything seen in the first digital rendering. The second two digital renderings are only used to show the accessories that you will mount to it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e The exterior dimensions are 12.52\" x 5.38\".\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUniversal fit\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e Designed to mount to any flat surface such as firewalls, fuse block lids, and battery boxes.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Utilizing four points of contact, you can be sure that your valuable electronics are safe and supported. Included are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e4 easy to install counter sunk screws with aluminum spacers and nuts.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHigh Quality Stainless Steel Hardware\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Stainless steel flush mount hardware allows the mounting screws to sit flush on the tray which is hidden by the accessories. \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePremium\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAluminum Spacers -\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eAlso included are half inch aluminum spacers which has 3M adhesive applied to one side. Allowing the spacer to stick to the tray for the those harder to reach install locations. \u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42810316423327,"sku":"","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/BlankSourceSEStandoff.png?v=1669395100"},{"product_id":"copy-of-powerswitch-powertray-tacoma-trd-off-road-pro","title":"Powerswitch PowerTray \u003e Tacoma \u003e SR, SR5, TRD Sport, Limited","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cb\u003eYOU WILL HAVE TWO OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR POWERSWITCH:\u003c\/b\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e1. Original PowerSwitch PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTake all the guess work out of wiring up a new accessory. The Original Powerswitch PowerTray creates the ultimate wire management solution for your PowerSwitch, while also providing a Blue Sea Systems 4 circuit fuse block for constant power and a ground bus bar. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the Powerswitch PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 6 circuits on the Powerswitch unit and the negative to your common ground busbar. That's it, you're done!\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Original Powerswitch PowerTray also features the Blue Sea 4 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Powerswitch. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Original Powerswitch PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e include the Garmin Powerswitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc.\u003ca href=\"https:\/\/www.powertrays.com\/products\/powerswitch-accessory-bundle-tacoma-trd-sport-sr5-limited\"\u003e Click Here\u003c\/a\u003e for those items.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e2. Essentials PowerSwitch PowerTray:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis option is the same as the Original PowerSwitch PowerTray seen above, minus the fuse block. Its a simple, compact solution to mount your PowerSwitch and busbar so you can keep your wiring clean and organized.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your PowerSwitch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis product is for the Essentials PowerSwitch PowerTray and mounting hardware.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIt does not include the PowerSwitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc. \u003ca href=\"https:\/\/www.powertrays.com\/products\/powerswitch-accessory-bundle-tacoma-trd-off-road-tacoma-trd-sport-4runner-fj-cruiser-gx\" title=\"Accessory Bundle\"\u003eClick Here\u003c\/a\u003e for those items.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e - The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVacuum Booster Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003ethis includes SR, SR5, TRD Sport and Limited models. These models feature a traditional vacuum booster as opposed to being electronically assisted like in the TRD Off Road models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e \u003cmeta charset=\"utf-8\"\u003e  \u003cspan data-mce-fragment=\"1\"\u003eto see a pic of both.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eSo\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eyour Tacoma has a\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003emanual transmission\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ehas \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-fragment=\"1\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Hood Struts:\u003c\/strong\u003e If you have or plan to install aftermarket hood struts, The PowerTray will need spaced out approximately 1\/2 inch so the hood strut clears the Switch-Pros power module. \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e for the spacer kit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original PowerSwitch PowerTray","offer_id":42946963046559,"sku":"","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Essentials PowerSwitch PowerTray","offer_id":42946963079327,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/BlankSportPowerswitch.png?v=1669396099"},{"product_id":"auxbeam-powertray-tacoma-sr-sr5-trd-sport-limited","title":"Auxbeam PowerTray \u003e Tacoma \u003e SR, SR5, TRD Sport, Limited","description":"\u003cdiv\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cspan\u003eAuxbeam has updated the AR800's design and unfortunately they kept the same part number. Below is a picture of the original Auxbeam AR800 with a silver sticker on the left and the new updated style with the orange sticker on the right, see pic below.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20241122_134114-3.jpg?v=1732309357\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eYou will have two options for the style of tray to mount your Auxbeam 8 Gang Multifunction Switch Panel\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e1. Original Auxbeam PowerTray:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis option combines the power of the Auxbeam multifunction switch panel with the constant power supply of the blue sea systems fuse block giving you everything you need to organize and maintain your electrical system like a professional.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eTake all the guess work out of wiring up a new accessory. The Original Auxbeam PowerTray creates the ultimate wire management solution for your Auxbeam, while also providing a Blue Sea Systems 4 circuit fuse block for constant power. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003c\/p\u003e\n\u003cp\u003eWith the Auxbeam installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive and negative to one of the 8 circuits on the Auxbeam unit. That's it, you're done!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Original Auxbeam PowerTray also features the Blue Sea 4 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Auxbeam. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is for the Originnal Auxbeam PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Auxbeam, Blue Sea accessories, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Switch Systems:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAuxbeam AR-800 (QP010985),AC800 (QP010785), AS-R80 (\u003cspan class=\"product_sku\"\u003e\u003cspan class=\"js-product-sku\"\u003eQP011653\u003c\/span\u003e\u003c\/span\u003e)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e2. Essentials Auxbeam PowerTray:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis option is a simple, compact solution to mount your Auxbeam and 60A circuit breaker giving you a clean professional look to organize and maintain your electrical system.\u003c\/p\u003e\n\u003cp\u003eTake all the guess work out of mounting and wiring up your new accessories. The Essentials Auxbeam PowerTray creates the ultimate wire management solution for your Auxbeam and the 60A circuit breaker. No more fiddling around with excess wires, you can use the the cables that come with the Auxbeam to power your new accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the Auxbeam installed, wiring up a new accessory is as easy as taking the positive and negative wires and attaching them to one of the 8 circuits on the Auxbeam unit. That's it, you're done!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Essentials Auxbeam PowerTray also allows you to mount the 60A circuit breaker right next to the switch panel creating a compact solution to mount all the required accessories to get the Auxbeam functioning properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier install of the Essentials Auxbeam PowerTray mounting platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is for the Essentials Auxbeam PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Auxbeam, 60A circuit breaker, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Switch Systems: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAuxbeam AR-800 (QP010985),AC800 (QP010785), AS-R80 (\u003cspan class=\"product_sku\"\u003e\u003cspan class=\"js-product-sku\"\u003eQP011653\u003c\/span\u003e\u003c\/span\u003e)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e - The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVacuum Booster Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003ethis includes SR, SR5, TRD Sport and Limited models. These models feature a traditional vacuum booster as opposed to being electronically assisted like in the TRD Off Road models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eto see a pic of both.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cspan\u003eSo\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eyour Tacoma has a\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emanual transmission\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ehas \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e\u003cspan\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Hood Struts:\u003c\/strong\u003e If you have or plan to install aftermarket hood struts, The PowerTray will need spaced out approximately 1\/2 inch so the hood strut clears the Switch-Pros power module. \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e for the spacer kit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original Auxbeam PowerTray \/ Black Powder Coat \/ Old Style (Sliver Sticker)","offer_id":44702588960927,"sku":"","price":130.0,"currency_code":"USD","in_stock":false},{"title":"Original Auxbeam PowerTray \/ Black Powder Coat \/ New Style (Orange Sticker)","offer_id":53593830359199,"sku":null,"price":130.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Auxbeam PowerTray \/ Black Powder Coat \/ Old Style (Sliver Sticker)","offer_id":44702588993695,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Auxbeam PowerTray \/ Black Powder Coat \/ New Style (Orange Sticker)","offer_id":53593830391967,"sku":null,"price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/BlankSportAuxbeam.png?v=1669395878"},{"product_id":"auxbeam-powertray-tacoma-trd-off-road-pro","title":"Auxbeam PowerTray \u003e Tacoma TRD Off Road\/Pro","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cspan\u003eAuxbeam has updated the AR800's design and unfortunately they kept the same part number. Below is a picture of the original Auxbeam AR800 with a silver sticker on the left and the new updated style with the orange sticker on the right, see pic below.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20241122_134114-3.jpg?v=1732309357\"\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: left;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eYou will have two options for the style of tray to mount your Auxbeam 8 Gang Multifunction Switch Panel\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e1. Original Auxbeam PowerTray:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis option combines the power of the Auxbeam multifunction switch panel with the constant power supply of the blue sea systems fuse block giving you everything you need to organize and maintain your electrical system like a professional.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eTake all the guess work out of wiring up a new accessory. The Original Auxbeam PowerTray creates the ultimate wire management solution for your Auxbeam, while also providing a Blue Sea Systems 6 circuit fuse block for constant power. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003c\/p\u003e\n\u003cp\u003eWith the Auxbeam installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive and negative to one of the 8 circuits on the Auxbeam unit. That's it, you're done!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Original Auxbeam PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Auxbeam. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is for the Original Auxbeam PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e include the Auxbeam, Blue Sea accessories, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Switch Systems: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAuxbeam AR-800 (QP010985),AC800 (QP010785), AS-R80 (\u003cspan class=\"product_sku\"\u003e\u003cspan class=\"js-product-sku\"\u003eQP011653\u003c\/span\u003e\u003c\/span\u003e)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e2. Essentials Auxbeam PowerTray:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis option is a simple, compact solution to mount your Auxbeam and 60A circuit breaker giving you a clean professional look to organize and maintain your electrical system.\u003c\/p\u003e\n\u003cp\u003eTake all the guess work out of mounting and wiring up your new accessories. The Essentials Auxbeam PowerTray creates the ultimate wire management solution for your Auxbeam and the 60A circuit breaker. No more fiddling around with excess wires, you can use the the cables that come with the Auxbeam to power your new accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the Auxbeam installed, wiring up a new accessory is as easy as taking the positive and negative wires and attaching them to one of the 8 circuits on the Auxbeam unit. That's it, you're done!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Essentials Auxbeam PowerTray also allows you to mount the 60A circuit breaker right next to the switch panel creating a compact solution to mount all the required accessories to get the Auxbeam functioning properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier install of the Essentials Auxbeam PowerTray mounting platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is for the Essentials Auxbeam PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Auxbeam, 60A circuit breaker, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Switch Systems:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAuxbeam AR-800 (QP010985),AC800 (QP010785), AS-R80 (\u003cspan class=\"product_sku\"\u003e\u003cspan class=\"js-product-sku\"\u003eQP011653\u003c\/span\u003e\u003c\/span\u003e)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edo not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehave the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eyour Tacoma has a\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003emanual transmission\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ehas \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Hood Struts:\u003c\/strong\u003e If you have or plan to install aftermarket hood struts, The PowerTray will need spaced out approximately 1\/2 inch so the hood strut clears the Switch-Pros power module. \u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e for the spacer kit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original Auxbeam PowerTray \/ Black Powder Coat \/ Old Style (Sliver Sticker)","offer_id":44702590140575,"sku":"","price":135.0,"currency_code":"USD","in_stock":false},{"title":"Original Auxbeam PowerTray \/ Black Powder Coat \/ New Style (Orange Sticker)","offer_id":53593829146783,"sku":null,"price":135.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Auxbeam PowerTray \/ Black Powder Coat \/ Old Style (Sliver Sticker)","offer_id":44702590173343,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Auxbeam PowerTray \/ Black Powder Coat \/ New Style (Orange Sticker)","offer_id":53593829179551,"sku":null,"price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20250218_140124-22.jpg?v=1740083326"},{"product_id":"auxbeam-powertray-4runner-fj-cruiser-gx","title":"Auxbeam PowerTray \u003e 4Runner\/ FJ Cruiser\/ GX","description":"\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cspan\u003eAuxbeam has updated the AR800's design and unfortunately they kept the same part number. Below is a picture of the original Auxbeam AR800 with a silver sticker on the left and the new updated style with the orange sticker on the right, see pic below.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20241122_134114-3.jpg?v=1732309357\" alt=\"\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\n\u003cstrong\u003eYou will have two options for the style of tray to mount your Auxbeam 8 Gang Multifunction Switch Panel:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e1. Original Auxbeam PowerTray:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis option combines the power of the Auxbeam multifunction switch panel with the constant power supply of the blue sea systems fuse block giving you everything you need to organize and maintain your electrical system like a professional.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eTake all the guess work out of wiring up a new accessory. The Original Auxbeam PowerTray creates the ultimate wire management solution for your Auxbeam, while also providing a Blue Sea Systems 6 circuit fuse block for constant power. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003c\/p\u003e\n\u003cp\u003eWith the Auxbeam installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive and negative to one of the 8 circuits on the Auxbeam unit. That's it, you're done!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Original Auxbeam PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Auxbeam. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.\u003c\/p\u003e\n\u003cp\u003eThe addition of a fuse block is also great for accessories like front\/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need a more robust power source to draw from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is for the Original Auxbeam PowerTray, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Auxbeam, Blue Sea accessories, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Switch Systems: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAuxbeam AR-800 (QP010985),AC800 (QP010785), AS-R80 (\u003cspan class=\"product_sku\"\u003e\u003cspan class=\"js-product-sku\"\u003eQP011653\u003c\/span\u003e\u003c\/span\u003e)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e2. Essentials Auxbeam PowerTray:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis option is a simple, compact solution to mount your Auxbeam and 60A circuit breaker giving you a clean professional look to organize and maintain your electrical system.\u003c\/p\u003e\n\u003cp\u003eTake all the guess work out of mounting and wiring up your new accessories. The Essentials Auxbeam PowerTray creates the ultimate wire management solution for your Auxbeam and the 60A circuit breaker. No more fiddling around with excess wires, you can use the the cables that come with the Auxbeam to power your new accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the Auxbeam installed, wiring up a new accessory is as easy as taking the positive and negative wires and attaching them to one of the 8 circuits on the Auxbeam unit. That's it, you're done!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Essentials Auxbeam PowerTray also allows you to mount the 60A circuit breaker right next to the switch panel creating a compact solution to mount all the required accessories to get the Auxbeam functioning properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThere is no support leg included with this tray since the mounting platform is smaller allowing for an easier install of the Essentials Auxbeam PowerTray mounting platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is for the Essentials Auxbeam PowerTray and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Auxbeam, 60A circuit breaker, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Switch Systems: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAuxbeam AR-800 (QP010985),AC800 (QP010785), AS-R80 (\u003cspan class=\"product_sku\"\u003e\u003cspan class=\"js-product-sku\"\u003eQP011653\u003c\/span\u003e\u003c\/span\u003e)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Powder Coat Finish \u003c\/strong\u003e- We use a high quality fine textured black powder coat to match your other accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e - The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with\u003cspan\u003e \u003c\/span\u003e\u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir. \u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\u003cstrong\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1\/2 inch in order to clear the factory hood struts. \u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto purchase the spacer kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Original Auxbeam PowerTray \/ Black Powder Coat \/ Old Style (Sliver Sticker)","offer_id":47343048425631,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Original Auxbeam PowerTray \/ Black Powder Coat \/ New Style (Orange Sticker)","offer_id":53593817120927,"sku":null,"price":135.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Auxbeam PowerTray \/ Black Powder Coat \/ Old Style (Sliver Sticker)","offer_id":47343048458399,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Essentials Auxbeam PowerTray \/ Black Powder Coat \/ New Style (Orange Sticker)","offer_id":53593817153695,"sku":null,"price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20250218_140124-22.jpg?v=1740083326"},{"product_id":"tundra-battery-mount-powertray-auxbeam","title":"Auxbeam PowerTray \u003e Tundra Battery Mount","description":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0); text-decoration: underline;\"\u003e\u003cstrong\u003eThis product is designed for the V1 of the Auxbeam AR800 New Style PowerTrays Coming Soon!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cspan data-mce-style=\"color: #ff0000;\"\u003eAuxbeam has updated the AR800's design and unfortunately they kept the same part number. Below is a picture of the original Auxbeam AR800 with a silver sticker on the left and the new updated style with the orange sticker on the right, see pic below.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e\u003cspan data-mce-style=\"color: #ff0000;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20241122_134114-3.jpg?v=1732309357\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis PowerTray is a simple, compact solution to mount your Auxbeam and 60A circuit breaker right over top your battery. This mount replaces the factory battery guard and installs in its place with zero modifications needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Auxbeam Battery Mount PowerTray creates the ultimate mounting solution for your Auxbeam and the 60A circuit breaker that comes with it. The 60A circuit breaker mounts right below the switch panel, creating a compact solution to mount all the required accessories to get the Auxbeam functioning properly. You can use the the cables that come with the Auxbeam to go from the battery to the circuit breaker to the auxbeam itself. This takes all the guess work out of mounting and wiring up your new power system.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith your Auxbeam mounted on the PowerTray, wiring up a new accessory is as easy as taking the positive and negative wires and attaching them to the Auxbeam unit. That's it, you're done!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe wires from your accessories enter the Auxbeam from underneath giving you a clean professional look to organize and maintain your electrical system.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFor installation instructions \u003c\/span\u003e\u003ca href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\" title=\"BATTERY MOUNT POWERTRAY INSTALL \u0026gt; 22-CURRENT TUNDRA\" style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; text-align: left;\"\u003eclick here\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the Auxbeam Battery Mount PowerTray and associated mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the Auxbeam, 60A circuit breaker, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible Switch Systems: Auxbeam AR-800, Auxbeam BA80, Auxbeam GA80, Auxbeam RA80 XL\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Old Style (Silver Sticker)","offer_id":53593833046175,"sku":"","price":95.0,"currency_code":"USD","in_stock":false},{"title":"New Style (Orange Sticker)","offer_id":53593833078943,"sku":"","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/TundraBatteryAuxbeamTop.png?v=1674509081"},{"product_id":"tundra-battery-mount-powertray-switch-pro","title":"Switch-Pros PowerTray \u003e Tundra Battery Mount","description":"\u003cp data-mce-fragment=\"1\"\u003eThis PowerTray is a perfect solution to mount your Switch-Pros and keep your wiring clean and organized right over top your battery. This mount replaces the factory battery guard and installs in its place.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eTake all the guess work out of wiring up a new accessory. The Switch-Pros Battery Mount PowerTray employs a dedicated 8 circuit barrier terminal block and low profile grounding busbar to keep your wiring organized and secure.  No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration. It also has a convenient spot for our \u003c\/span\u003e\u003cspan\u003e120A compact waterproof circuit breaker right next to the positive terminal on the battery. All together creating the ultimate wire management solution for your Switch-Pros.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe wires coming from your Switch-Pros route down though the included rubber grommet and back up to connect to the 8 circuit barrier terminal block. Now with the Switch-Pros PowerTray system installed all the positive wires from your accessories can connect to the opposite side of the terminal block and the negatives to the busbar.\u003c\/span\u003e That's it, you're done! No need to bust out a soldering iron or buy bulky connectors that require expensive specialty crimpers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca title=\"JL\/JT Accessory Bundle\" href=\"https:\/\/www.powertrays.com\/products\/accessory-bundle-for-switch-pro-powertray-jeep-jl-jt\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.powertrays.com\/collections\/accessory-bundles\/products\/accessory-bundle-for-switch-pro-powertray-tundra\"\u003eCLICK HERE \u003c\/a\u003efor all the components needed for a full install.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the Switch-Pros Battery Mount PowerTray and associated mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIt \u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the Switch Pro, Circuit Breaker, Blue Sea Accessories, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor installation instructions \u003ca href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\" title=\"BATTERY MOUNT POWERTRAY INSTALL \u0026gt; 22-CURRENT TUNDRA\" style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; text-align: left;\"\u003eclick here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439218872479,"sku":null,"price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/image.heic?v=1754069104"},{"product_id":"tundra-battery-mount-powertray-powerswitch","title":"PowerSwitch PowerTray \u003e Tundra Battery Mount","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis PowerTray is a perfect solution to mount your Garmin PowerSwitch and keep your wiring clean and organized right over top your battery.\u003c\/span\u003e This mount replaces the factory battery guard and installs in its place with zero modifications needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eTake all the guess work out of wiring up a new accessory. The Powerswitch Battery Mount PowerTray has dedicated mounting locations for the PowerSwitch, low profile grounding busbar, and our 100A compact waterproof circuit breaker. The grounding busbar is located right behind the PowerSwitch, so there is no more cluttering up your ground terminal on the battery or scrambling to find a secure and reliable ground elsewhere on the vehicle for each of your accessories. We've been there and done that and learned from that frustration. It also has a convenient spot for our circuit breaker right below the PowerSwitch and near the positive terminal of the battery. All together creating the ultimate power management solution for your Tundra.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the PowerSwitch Battery Mount PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 6 circuits on the Powerswitch unit and the negative to the common ground busbar. That's it, you're done!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the PowerSwitch Battery Mount PowerTray and associated mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the Garmin PowerSwitch, Circuit Breakers, Blue Sea Accessories, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor installation instructions \u003c\/span\u003e\u003ca href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\" title=\"BATTERY MOUNT POWERTRAY INSTALL \u0026gt; 22-CURRENT TUNDRA\" style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; text-align: left;\" data-mce-fragment=\"1\" data-mce-style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; text-align: left;\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\"\u003eclick here\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439223394463,"sku":null,"price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Tundra_PS.jpg?v=1764180408"},{"product_id":"tundra-battery-mount-powertray-dual-cb","title":"Dual Circuit Breaker PowerTray \u003e Tundra Battery Mount","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis PowerTray is a perfect solution to mount our compact waterproof circuit breakers right over top your battery.\u003c\/span\u003e This mount replaces the factory battery guard and installs in its place with zero modifications needed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe circuit breakers are resettable if the current exceeds the max rating and you can cut power to the system for when you're working on it and wiring up new accessories. Mounting the circuit breakers directly on top of the battery maximizes the level of protection available for your system creating a convenient and safe way to protect your electrical accessories.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: This product is only compatible with PowerTrays Compact Waterproof Circuit Breakers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the Dual CB Battery Mount PowerTray and associated mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the Circuit Breakers, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor installation instructions \u003ca style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; text-align: left;\" title=\"BATTERY MOUNT POWERTRAY INSTALL \u0026gt; 22-CURRENT TUNDRA\" href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\"\u003eclick here\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42921825960095,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/TundraBatteryDualCBBlank.png?v=1674593123"},{"product_id":"copy-of-tundra-battery-mount-powertray-blank","title":"Blank PowerTray \u003e Tundra Battery Mount","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Blank Battery Mount PowerTray lets you customize and design your own electrical setup based on whatever components fit your needs. The mount replaces the factory battery guard and installs in its place.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDespite being called the \"Blank\" Battery Mount PowerTray it still has the bolt slots on the tabs so it can be installed into the factory bolt locations without any modification needed to either the PowerTray or your Tundra.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eFor installation instructions \u003c\/span\u003e\u003ca href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\" title=\"BATTERY MOUNT POWERTRAY INSTALL \u0026gt; 22-CURRENT TUNDRA\" style=\"overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;\"\u003eclick here\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439219658911,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/TundraBatteryBlankTop.png?v=1674595891"},{"product_id":"tundra-battery-mount-powertray-bantamx","title":"BantamX PowerTray \u003e Tundra Battery Mount","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis PowerTray is a perfect solution to mount your BantamX and keep your wiring clean and organized right over top your battery.\u003c\/span\u003e This mount replaces the factory battery guard and installs in its place with zero modifications needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eTake all the guess work out of wiring up a new accessory. The BantamX Battery Mount PowerTray has dedicated mounting locations for the BantamX and our compact waterproof circuit breaker. The tray utilizes the standoff platform that is provided with the BantamX allwing you to run all your wires into the BantamX using the existing wire slots giving you a clean professional look to organize and maintain your electrical system. It also has a convenient spot for our circuit breaker right below the BantamX and near the positive terminal of the battery. All together creating the ultimate solution for powering your adventures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eWith your BantamX PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires and attaching them to the BantamX unit. That's it, you're done!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eFor installation instructions \u003ca style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; text-align: left;\" title=\"BATTERY MOUNT POWERTRAY INSTALL \u0026gt; 22-CURRENT TUNDRA\" href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\"\u003eclick here\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the BantamX Battery Mount PowerTray and associated mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the BantamX, Circuit Breakers, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42921874063519,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/TundraBatteryBantamXBlank.png?v=1674596881"},{"product_id":"tundra-battery-mount-powertray-12-circuit-fuse-block","title":"12 Circuit Fuse Block PowerTray \u003e Tundra Battery Mount","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis PowerTray is a perfect solution to mount a Blue Sea 12 Circuit Fuse Block and keep your wiring clean and organized right over top your battery.\u003c\/span\u003e This mount replaces the factory battery guard and installs in its place with zero modifications needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eTake all the guess work out of wiring up a new accessory. The 12 Circuit Fuse Block Battery Mount PowerTray has dedicated mounting locations for the fuse block and our 100A compact waterproof circuit breaker. The 100A circuit breaker is right below the Fuse Block and near the positive terminal of the battery for a safe and easy installation of your accessories. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eFor installation instructions \u003ca style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; overflow-wrap: break-word; word-break: break-word; box-sizing: border-box; background: #fafafa; color: #f31717; transition: color 0.1s ease-in-out 0s; font-family: 'Avenir Next', sans-serif; font-size: 16px; text-align: left;\" title=\"BATTERY MOUNT POWERTRAY INSTALL \u0026gt; 22-CURRENT TUNDRA\" href=\"https:\/\/www.powertrays.com\/pages\/battery-mount-powertray-install-22-current-tundra\"\u003eclick here\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis product is for the 12 Circuit Fuse Block Battery Mount PowerTray and associated mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einclude the 12 Circuit Fuse Block, Circuit Breaker, Power\/Ground cables, Terminals\/fuses etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":42921930784927,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/TundraBattery12CircuitFuseBlockBlank.png?v=1674602168"},{"product_id":"jeep-jl-jt-2018-current-3-6l-v6-blank-powertray","title":"Blank PowerTray \u003e Jeep JL\/JT 2018-Current \u003e 3.6L V6","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cp style=\"text-align: left;\" data-mce-fragment=\"1\"\u003eThe Blank PowerTray lets you customize and design your own electrical setup based on whatever components fit your needs. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Despite being called the \"Blank\" PowerTray, it still has the mounting holes and hardware needed so it can be installed without any modification needed to either the PowerTray or your Jeep.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003eThis is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003ejagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or\u003cspan\u003e \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003escratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eAll PowerTrays are designed, manufactured , and shipped from Colorado.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"PowerTrays","offers":[{"title":"Black Powder Coat","offer_id":62439218741407,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/JeepBlankTop.png?v=1674670328"},{"product_id":"powerswicth-powertray-tundra-fender-mount","title":"PowerSwicth PowerTray \u003e Tundra Fender Mount","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePowerSwitch Fender Mount PowerTray: Works with hybrid and non-hybrid models of the third GEN Toyota tundra and Sequoia platforms.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou can purchase this mount by itself OR with the \u003cmeta charset=\"utf-8\"\u003eBlue Sea Busbar, 4AWG Power\/Ground cables, and circuit breaker. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Garmin PowerSwitch. However you can bundle them together with a discount by scrolling down to the bottom of the page and adding them both to cart.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis PowerTray is a perfect solution to mount your Garmin PowerSwitch and keep your wiring clean and organized.\u003c\/span\u003e This mount replaces the factory plastic fender guard and installs in its place with zero modifications needed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTake all the guess work out of wiring up a new accessory. The Powerswitch Fender Mount PowerTray creates the ultimate wire management solution for your PowerSwitch, while also providing a ground bus bar and location for a circuit breaker. No more scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWith the Powerswitch Fender Mount PowerTray installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 6 circuits on the Powerswitch unit and the negative to your common ground busbar. That's it, you're done!\u003c\/p\u003e\n\u003cp\u003eThe Powerswitch Fender Mount PowerTray also features a location for our compact waterproof 100 amp circuit breaker(sold separately), which protects your valuable system and gives you the ability to easily cut power to your system when you're working on it or when your vehicle is parked for extended periods of time.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.001\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing the entirety of the inner fender, you can be sure that your valuable electronics are safe and supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- We don't cheap out on our hardware. This kit is composed of high-quality zinc plated counter sunk hardware for installing the mount to the inner fender and stainless steel screws to secure your accessories to our mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"PowerSwitch Fender Mount PowerTray W\/ None \/ Hybrid \/ None","offer_id":42951162953887,"sku":"","price":230.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ None \/ Hybrid \/ Pack of 1 - Ignition Tap","offer_id":62785446150303,"sku":null,"price":240.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ None \/ Hybrid \/ Pack of 2 (Optional) - Ignition \u0026 Custom","offer_id":62785446183071,"sku":null,"price":248.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ None \/ Non-Hybrid \/ None","offer_id":62788036952223,"sku":null,"price":230.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ None \/ Non-Hybrid \/ Pack of 1 - Ignition Tap","offer_id":62788036984991,"sku":null,"price":240.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ None \/ Non-Hybrid \/ Pack of 2 (Optional) - Ignition \u0026 Custom","offer_id":62788037017759,"sku":null,"price":248.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ Cables Busbar and CB \/ Hybrid \/ None","offer_id":62785446215839,"sku":null,"price":340.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ Cables Busbar and CB \/ Hybrid \/ Pack of 1 - Ignition Tap","offer_id":62785446248607,"sku":null,"price":350.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ Cables Busbar and CB \/ Hybrid \/ Pack of 2 (Optional) - Ignition \u0026 Custom","offer_id":62785446281375,"sku":null,"price":358.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ Cables Busbar and CB \/ Non-Hybrid \/ None","offer_id":62788037050527,"sku":null,"price":340.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ Cables Busbar and CB \/ Non-Hybrid \/ Pack of 1 - Ignition Tap","offer_id":62788037083295,"sku":null,"price":350.0,"currency_code":"USD","in_stock":true},{"title":"PowerSwitch Fender Mount PowerTray W\/ Cables Busbar and CB \/ Non-Hybrid \/ Pack of 2 (Optional) - Ignition \u0026 Custom","offer_id":62788037116063,"sku":null,"price":358.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/20260505_132424.jpg?v=1778012730"},{"product_id":"dual-powerswitch-powertray-tacoma-trd-off-road-pro","title":"Dual Powerswitch PowerTray \u003e Tacoma TRD Off Road\/Pro","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\n\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eWHATS BETTER THAN HAVING THE GARMIN POWERSWITCH POWERING ALL YOUR OFF ROAD ACCESSORIES? HOW ABOUT HAVING TWO POWERSWITCHES POWERING ALL YOUR OFF ROAD ACCESSORIES!\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTake all the guess work out of wiring up a new accessory. The Dual Powerswitch PowerTray creates the ultimate wire management solution for your PowerSwitches, while also providing two grounding bus bars. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the Dual Powerswitch PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 6 circuits on the Powerswitch unit and the negative to your common ground busbar. That's it, you're done!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Dual PowerSwitch PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e include the Garmin Powerswitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc.\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e - Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e - The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e - Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit 2nd and 3rd GEN Toyota Tacoma's (05-23) with the following requirements:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eElectric Assist Braking\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eThis includes TRD Off Road and TRD Pro models. These models feature an electronic assisted braking system as opposed to the traditional vacuum booster seen in other models. Note: Regardless of any bedside stickers or options your Tacoma may have, double check that you have the electric assist braking system and \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edo not\u003c\/span\u003e have the vacuum booster behind the master cylinder.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/Slide1.jpeg?v=1606272657\"\u003eCLICK HERE\u003c\/a\u003e to see a pic of both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic Transmissions or Manual transmissions that DO NOT have the fender-mounted clutch fluid reservoir.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eSo \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIF\u003c\/strong\u003e\u003c\/span\u003e your Tacoma has a \u003cmeta charset=\"utf-8\"\u003emanual transmission \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003c\/span\u003e has \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/image12109_2.jpg?v=1606262111\"\u003ethis reservoir\u003c\/a\u003e bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir.  \u003ca href=\"mailto:Sale@Powertrays.com\" data-mce-href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecial Considerations: \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket Hood Struts:\u003c\/strong\u003e If you have or plan to install aftermarket hood struts, The PowerTray will need spaced out approximately 1\/2 inch so the hood strut clears the Switch-Pros power module. \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\" data-mce-href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e for the spacer kit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSuperchargers:\u003c\/strong\u003e Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_3125_2.jpg?v=1620152110\"\u003eCLICK HERE\u003c\/a\u003e to see pic of the Standoff PowerTray Mounted with the reservoir.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\" data-mce-href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":43056660873375,"sku":"","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/ToyotaDualPSTop.png?v=1680645494"},{"product_id":"dual-bantamx-powertray-standoff","title":"Dual BantamX Powertray \u003e Standoff","description":"\u003ch4 data-mce-fragment=\"1\" style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eThe Dual BantamX PowerTray just got even better. Introducing a new, more universal mounting option that can be installed onto any flat surface.\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Standoff Dual BantamX PowerTray was designed as a universal style mount for any vehicle or camper build you want.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt also works great for Toyota’s that have something obstructing the usual PowerTray location. For example, many manual transmission Tacoma's and FJ's have a clutch fluid reservoir mounted right where the PowerTray traditionally installs. For these models this tray works really well if you mount it to the top of the OE fuse block cover. The beautiful thing about mounting it on top of the factory fuse block is the OE fuses and relays can still be accessed if needed without any tools. We're super excited about this product and its versatility. We can't wait to see all the cool applications our customers use this for!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eProduct includes everything seen in photo one and two. The third photo is a digital rendering only used to show the accessories that you will mount to it.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e The exterior dimensions are 11.26\" x 5.74\".\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChamfered edges\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUniversal fit\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e Designed to mount to any flat surface such as firewalls, fuse block lids, and battery boxes.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Utilizing four points of contact, you can be sure that your valuable electronics are safe and supported. Included are\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e4 easy to install counter sunk screws with aluminum spacers and nuts.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHigh Quality Stainless Steel Hardware\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Stainless steel flush mount hardware allows the mounting screws to sit flush on the tray which is hidden by the accessories. \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePremium\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAluminum Spacers -\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eAlso included are half inch aluminum spacers which has 3M adhesive applied to one side. Allowing the spacer to stick to the tray for the those harder to reach install locations. \u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePower Made Easy\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":43056675618975,"sku":"","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/StandoffDualBantamXTop.png?v=1680647314"},{"product_id":"dual-powerswitch-powertray-4runner-fj-cruiser-gx","title":"Dual Powerswitch PowerTray \u003e 4Runner\/ FJ Cruiser\/ GX","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eWHATS BETTER THAN HAVING THE GARMIN POWERSWITCH POWERING ALL YOUR OFF ROAD ACCESSORIES? HOW ABOUT HAVING TWO POWERSWITCHES POWERING ALL YOUR OFF ROAD ACCESSORIES!\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTake all the guess work out of wiring up a new accessory. The Dual Powerswitch PowerTray creates the ultimate wire management solution for your PowerSwitches, while also providing two grounding bus bars. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the Dual Powerswitch PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 6 circuits on the Powerswitch unit and the negative to your common ground busbar. That's it, you're done!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis product is for the Dual PowerSwitch PowerTray Mounting Platform, Support Leg, and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIt \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003edoes not\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003einclude the Garmin Powerswitch, Blue Sea accessories, Power\/Ground Cables, terminals\/fuses etc.\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePEM® Fasteners with Stainless Steel Screws \u003c\/strong\u003e- Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8th Inch 5052 Aircraft Aluminum\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterjet manufacturing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Guarantees precise cuts with an accuracy of ±0.003\", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered edges\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect fit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDon't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnparalleled stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Quality JIS Class 10.9 Steel Hardware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Made Easy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Delivered right to your door with step-by-step installation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eThis PowerTray will fit the following vehicles:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota FJ cruiser 07-14 with \u003cu\u003eAutomatic Transmission\u003c\/u\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eUnfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir.  \u003ca href=\"mailto:Sale@Powertrays.com\"\u003eSales@Powertrays.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/IMG_5160.JPG?v=1606094026\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e for pic of bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eToyota 5th gen 4Runner's 09-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 2020+ 4runners have an additional relay\/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. \u003ca href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" data-mce-href=\"https:\/\/www.powertrays.com\/pages\/2020-4runner-relay-box-relocation\" target=\"_blank\"\u003eCLICK HERE\u003c\/a\u003e to see the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"ql-indent-1\"\u003e\u003cstrong\u003eToyota 4th gen 4Runner's 02-09\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1\/2 inch in order to clear the factory hood struts. \u003ca href=\"https:\/\/www.powertrays.com\/products\/hood-strut-spacer-kit\"\u003eCLICK HERE\u003c\/a\u003e to purchase the spacer kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eLexus GX470 02-09 and GX460 10-Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli class=\"ql-indent-1\"\u003eNote: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If you see something say something! If you notice any inaccurate info above let us know so we can update it. \u003ca href=\"mailto:Sales@PowerTrays.com\"\u003eSales@PowerTrays.com\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":43061368357023,"sku":"","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/products\/ToyotaDualPSTop_e0372248-9969-4a00-af9e-d7be0c01a63d.png?v=1680883991"},{"product_id":"2nd-gen-tundra-brackets-07-21","title":"2nd gen tundra brackets 07-21","description":"\u003cp\u003eThese three little brackets give you the ability to install the Switch-Pros or Powerswitch Universal Stand-Off mounts and suspend it over the brake booster and out of the way. This product does not come with the actual standoff tray. That needs purchased separately.\u003c\/p\u003e","brand":"PowerTrays","offers":[{"title":"Default Title","offer_id":62455896506527,"sku":"TONLG123","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/files\/1FAC6EC1-8384-4348-AD77-E497F1FC5025.heic?v=1755619109"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2143\/9039\/collections\/Screen_Shot_2017-06-30_at_4.30.42_PM_720x_d4c03e98-2284-47a6-b650-08925ef474f2.png?v=1565562222","url":"https:\/\/www.powertrays.com\/collections\/powertrays\/bantam.oembed","provider":"PowerTrays","version":"1.0","type":"link"}