ARB Single, Blue Sea Fuse Box and Zamp solar charge controller for a truly complete power system.
Zamp 5 Stage 10 Amp PWM Solar Charge Controller uses a large digital display showing volts, amps and amp over a period of time while LED lights show charging status and battery condition. Our digital deluxe 10 Amp Solar Charge Controller is designed to do it’s job with out the need for maintenance but it also is feature rich to monitor and indicate system functions. It supports, and is programmable for 4 typical types of deep cycle batteries (WET, GET, AGM and Calcium) as well as lithium batteries (LTO and LifeP04).For now installation of the
The ARB/Solar PowerTray features a Blue Sea 6 circuit fuse block which gives you the added ability to wire in accessories that would be inconvenient to power though a Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on. An addition fuse block is also great for accessories like front/rear mount cameras, aftermarket HID headlights, aftermarket Horns, etc. Accessories like this use the vehicles own internal system to activate the accessory but due to the thin gauge of wire used for OEM applications most new accessories have their own power input to draw from.
ARB air compressor is a DIY install and an assortment of airline fittings are needed in order to relocate the air coupler to the PowerTray.
All PowerTrays are Waterjet cut out of robust 1/8" Brushed Aluminum and perfectly bent to match the angle of the inner fender. PowerTrays achieves unparalleled stability utilizing three points of contact with the use of an additional support leg that secures the far side of the tray by bolting it down to the lower fender. Ships right to your front door with full color instructions. Designed, Made, and Shipped from Colorado.
- Switch-Pro/Blue Sea PowerTray
- Support Leg
- Hardware Bag
Recommended for use with:
Zamp solar charge controller
1/4 NPT Bulkhead fitting
ARB single compressor
ARB air up kit
Manual transmission models require the clutch fluid reservoir to be relocated to a special bracket installed on the underside of the PowerTray. Click Here for more info on the process.