This PowerTray is a perfect solution to mount your BantamX and keep your wiring clean and organized right over top your battery. This mount replaces the factory battery guard and installs in its place with zero modifications needed.
Take all the guess work out of wiring up a new accessory. The BantamX Battery Mount PowerTray has dedicated mounting locations for the BantamX and our compact waterproof circuit breaker. The tray utilizes the standoff platform that is provided with the BantamX allwing you to run all your wires into the BantamX using the existing wire slots giving you a clean professional look to organize and maintain your electrical system. It also has a convenient spot for our circuit breaker right below the BantamX and near the positive terminal of the battery. All together creating the ultimate solution for powering your adventures.
With your BantamX PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires and attaching them to the BantamX unit. That's it, you're done!
For installation instructions click here.
This product is for the BantamX Battery Mount PowerTray and associated mounting hardware.
It does not include the BantamX, Circuit Breakers, Power/Ground cables, Terminals/fuses etc.
PEM® Fasteners with Stainless Steel Screws - Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.
1/8th Inch 5052 Aircraft Aluminum - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
Waterjet manufacturing - Guarantees precise cuts with an accuracy of ±0.003", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
Chamfered edges - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
Power Made Easy - Delivered right to your door with step-by-step installation instructions.